AFTC-ETC-100+.REF. Temperature Controller.
The AFTC-ETC-100+ is a microcomputer-based digital temperature controller. It is specifically designed for single-sensor applications like refrigeration, heating, or water chillers.
Technical Specifications
- Measurement & Control Range: -40°C to 120°C.
- Accuracy: ±1°C between -40°C and 70°C; ±2°C for other ranges.
- Resolution: 0.1°C (between -40°C and 99.9°C); 1°C in other ranges.
- Power Supply: 220VAC ±10% / -15%, 50/60Hz.
- Relay Contact Capacity: 10A/220VAC, capable of driving a maximum load of 0.5HP/220VAC.
- Sensor Type: NTC sensor (10KΩ/25°C, B value 3435K), with a 2-meter cable.
- Product Size: Front panel is 75mm x 34.5mm; mounting hole size is 71mm x 29mm.
Key Functions
- Dual Mode: Supports both refrigeration and heating modes.
- Refrigeration Mode: Starts cooling when the measured temperature reaches the upper limit and stops at the lower limit.
- Start-up Delay: Includes compressor protection by delaying startup after being electrified or stopping.
- Alarms: Features a built-in buzzer for over-temperature alerts and sensor failure errors (displayed as E1 or E2).
- Security: Password-protected parameter menu to prevent unauthorized changes.
Parameter Settings
The following menu codes are typical for the ETC-100 series:
| Code | Meaning | Range | Default |
|---|---|---|---|
| F01 | Set temperature upper limit | -49°C to 120°C | -15°C |
| F02 | Set temperature lower limit | -50°C to 119°C | -18°C |
| F03 | Temperature calibration | -5°C to +5°C | 0°C |
| F04 | Start-up delay time | 0 to 30 minutes | 3 min |
Basic Operation
- Enter Menu: Press and hold the SET key for about 6 seconds until a code appears.
- Adjust Parameters: Enter the correct password (default is often 111), use the Up/Down keys to navigate, and press SET to modify the value.
- Save & Exit: Press and hold SET for at least 3 seconds once all parameters are modified.
Warning: Always verify the voltage on your specific unit’s side label before wiring, as connecting a 110V model to a 220V power supply will damage the device.
-
Supplier InformationThis specific branded model is supplied by Ayub First Trading Company, which has showrooms across Saudi Arabia including Riyadh, Dammam, Jeddah, and Khobar.
- Contact Number: +966 56 004 2170.
Description
Description
The AFTC-ETC-100+ is a microcomputer-based digital temperature controller. It is specifically designed for single-sensor applications like refrigeration, heating, or water chillers.
Technical Specifications
- Measurement & Control Range: -40°C to 120°C.
- Accuracy: ±1°C between -40°C and 70°C; ±2°C for other ranges.
- Resolution: 0.1°C (between -40°C and 99.9°C); 1°C in other ranges.
- Power Supply: 220VAC ±10% / -15%, 50/60Hz.
- Relay Contact Capacity: 10A/220VAC, capable of driving a maximum load of 0.5HP/220VAC.
- Sensor Type: NTC sensor (10KΩ/25°C, B value 3435K), with a 2-meter cable.
- Product Size: Front panel is 75mm x 34.5mm; mounting hole size is 71mm x 29mm.
Key Functions
- Dual Mode: Supports both refrigeration and heating modes.
- Refrigeration Mode: Starts cooling when the measured temperature reaches the upper limit and stops at the lower limit.
- Start-up Delay: Includes compressor protection by delaying startup after being electrified or stopping.
- Alarms: Features a built-in buzzer for over-temperature alerts and sensor failure errors (displayed as E1 or E2).
- Security: Password-protected parameter menu to prevent unauthorized changes.
Parameter Settings
The following menu codes are typical for the ETC-100 series:
| Code | Meaning | Range | Default |
|---|---|---|---|
| F01 | Set temperature upper limit | -49°C to 120°C | -15°C |
| F02 | Set temperature lower limit | -50°C to 119°C | -18°C |
| F03 | Temperature calibration | -5°C to +5°C | 0°C |
| F04 | Start-up delay time | 0 to 30 minutes | 3 min |
Basic Operation
- Enter Menu: Press and hold the SET key for about 6 seconds until a code appears.
- Adjust Parameters: Enter the correct password (default is often 111), use the Up/Down keys to navigate, and press SET to modify the value.
- Save & Exit: Press and hold SET for at least 3 seconds once all parameters are modified.
Warning: Always verify the voltage on your specific unit’s side label before wiring, as connecting a 110V model to a 220V power supply will damage the device.
-
Supplier InformationThis specific branded model is supplied by Ayub First Trading Company, which has showrooms across Saudi Arabia including Riyadh, Dammam, Jeddah, and Khobar.
- Contact Number: +966 56 004 2170.
Reviews
There are no reviews yet.