AFTC-ETC-512B.REF. Temperature Controller.
The AFTC-ETC-512B is a microcomputer-based digital temperature controller primarily designed for refrigeration systems but also configurable for heating applications. It features a large LED display, touch keys, and is housed in a compact panel-mount design.
Technical Specifications
- Measurement & Control Range: -50°C to 105°C.
- Accuracy: ±1°C (between -40°C and 50°C); ±2°C for other ranges.
- Resolution: 0.1°C.
- Power Supply: 220VAC ±10%, 50/60Hz.
- Relay Capacity: 16A at 250VAC, capable of driving a 1HP compressor directly.
- Sensor Type: NTC probe (10KΩ/25°C), typically with a 2-meter cable.
- Protection Rating: IP65 for the front panel (water and dust resistant).
Key Features
- Dual Mode: Supports both refrigeration (cooling) and heating functions.
- Off-Cycle Defrost: Includes an adjustable defrost mode for refrigeration cycles.
- Safety Alarms: Features a built-in buzzer for over-temperature alerts and sensor failure detection.
- Quick Recovery: Includes a “one-key recovery” function to quickly restore factory default settings.
- Tamper Protection: Supports password locking to prevent unauthorized changes to parameters.
Basic Operation
- Unlock: If the keyboard is locked, press the SET key for several seconds until the parameter code appears.
- Set Temperature: Press SET for 2 seconds until “SET” appears, adjust the value using the Up/Down arrows, and press SET again to save.
- Manual Defrost: Press and hold the DEF (Defrost) key for several seconds to manually initiate a cycle.
Common Menu Codes
| Code | Function | Range |
|---|---|---|
| F01 | Password (Default often 123) | 00–999 |
| F02 | Temperature Calibration | -5.0 to +5.0°C |
| F05 | Hysteresis (Difference value) | 0.1 to 20.0°C |
| F06 | Start-up Delay Time | 0 to 99 minutes |
Typical Wiring
- Terminals 1 & 2: Power supply input (220VAC).
- Terminals 3 & 4: Relay output for the compressor or heater.
- Terminals 5 & 6: Connection for the NTC sensor probe.
-
Supplier InformationThis specific branded model is supplied by Ayub First Trading Company, which has showrooms across Saudi Arabia including Riyadh, Dammam, Jeddah, and Khobar.
- Contact Number: +966 56 004 2170.
Description
Description
The AFTC-ETC-512B is a microcomputer-based digital temperature controller primarily designed for refrigeration systems but also configurable for heating applications. It features a large LED display, touch keys, and is housed in a compact panel-mount design.
Technical Specifications
- Measurement & Control Range: -50°C to 105°C.
- Accuracy: ±1°C (between -40°C and 50°C); ±2°C for other ranges.
- Resolution: 0.1°C.
- Power Supply: 220VAC ±10%, 50/60Hz.
- Relay Capacity: 16A at 250VAC, capable of driving a 1HP compressor directly.
- Sensor Type: NTC probe (10KΩ/25°C), typically with a 2-meter cable.
- Protection Rating: IP65 for the front panel (water and dust resistant).
Key Features
- Dual Mode: Supports both refrigeration (cooling) and heating functions.
- Off-Cycle Defrost: Includes an adjustable defrost mode for refrigeration cycles.
- Safety Alarms: Features a built-in buzzer for over-temperature alerts and sensor failure detection.
- Quick Recovery: Includes a “one-key recovery” function to quickly restore factory default settings.
- Tamper Protection: Supports password locking to prevent unauthorized changes to parameters.
Basic Operation
- Unlock: If the keyboard is locked, press the SET key for several seconds until the parameter code appears.
- Set Temperature: Press SET for 2 seconds until “SET” appears, adjust the value using the Up/Down arrows, and press SET again to save.
- Manual Defrost: Press and hold the DEF (Defrost) key for several seconds to manually initiate a cycle.
Common Menu Codes
| Code | Function | Range |
|---|---|---|
| F01 | Password (Default often 123) | 00–999 |
| F02 | Temperature Calibration | -5.0 to +5.0°C |
| F05 | Hysteresis (Difference value) | 0.1 to 20.0°C |
| F06 | Start-up Delay Time | 0 to 99 minutes |
Typical Wiring
- Terminals 1 & 2: Power supply input (220VAC).
- Terminals 3 & 4: Relay output for the compressor or heater.
- Terminals 5 & 6: Connection for the NTC sensor probe.
-
Supplier InformationThis specific branded model is supplied by Ayub First Trading Company, which has showrooms across Saudi Arabia including Riyadh, Dammam, Jeddah, and Khobar.
- Contact Number: +966 56 004 2170.
Reviews
There are no reviews yet.