3/4 inch S-Type R-22 Service Valve : AFTC-SAS-005
This model represents a high-capacity split air conditioner service valve, typically used on the suction/gas line of larger residential or commercial systems (often 4 to 5-ton units) to accommodate high volumes of refrigerant flow.
📋 Technical Specifications
- Model Number:
AFTC-SAS-005 - Component Type: Split Air Conditioner Service Valve
- Size Notation: 3/4 (Industry terminology indicating a 3/4 inch connection diameter).
- Design Profile: S-Type (Specifies the layout and geometry of the brass mounting body).
- Refrigerant Compatibility: Designated for R-22 systems.
🔍 Structural Design & Ports
- Pre-Swaged Copper Stub: The wide copper extension tube on the left allows the corresponding internal line to slip inside easily for a secure silver brazing connection. It features a protective cap to keep out dust and moisture before installation.
- Main Flare Port: The heavy-duty brass threaded connection facing downwards features a large flare nut to lock down the main 3/4″ suction line-set.
- Service Access Port: The smaller threaded port extending upward allows technicians to connect manifold gauge hoses to vacuum, charge, or read low-side operating pressures.
- Internal Valve Spindle: The brass-capped chamber on the right houses the internal hex-head plunger used to completely seal or open the refrigerant path.
Description
Description
This model represents a high-capacity split air conditioner service valve, typically used on the suction/gas line of larger residential or commercial systems (often 4 to 5-ton units) to accommodate high volumes of refrigerant flow.
📋 Technical Specifications
- Model Number:
AFTC-SAS-005 - Component Type: Split Air Conditioner Service Valve
- Size Notation: 3/4 (Industry terminology indicating a 3/4 inch connection diameter).
- Design Profile: S-Type (Specifies the layout and geometry of the brass mounting body).
- Refrigerant Compatibility: Designated for R-22 systems.
🔍 Structural Design & Ports
- Pre-Swaged Copper Stub: The wide copper extension tube on the left allows the corresponding internal line to slip inside easily for a secure silver brazing connection. It features a protective cap to keep out dust and moisture before installation.
- Main Flare Port: The heavy-duty brass threaded connection facing downwards features a large flare nut to lock down the main 3/4″ suction line-set.
- Service Access Port: The smaller threaded port extending upward allows technicians to connect manifold gauge hoses to vacuum, charge, or read low-side operating pressures.
- Internal Valve Spindle: The brass-capped chamber on the right houses the internal hex-head plunger used to completely seal or open the refrigerant path.
Reviews
There are no reviews yet.